What can I do when logged in?

You can submit new articles, so we can make unique versions of them and distribute them for you.
If you want to simply publish the same article on 800 websites, you can tell us to do that.
You can see the archive and current status of all your article distributions.
You can order any number of high-quality articles - just let us know your keywords.
You can browse the archive of all the articles we have written for you.
You can order our Complete Service (10 high-quality articles plus 10 article distributions).
You can purchase more credits for our services and check your affiliate earnings.
Much more ...

SpinDistribute.com Article Directory

The following article was published in our article directory on June 22, 2013.
Learn more about SpinDistribute Article Distribution System.

Creating Silicone Pot Holder Trivet from Junk

Article Category: Cooking

Having a pot holder around the kitchen can help do wonders for most of your cooking and food handling activities. In this article, you will learn more on how to create your own silicone pot holder trivet using scrap materials.

Materials

Before you start off with your pot holder creation, you need to prepare the materials that you will need for this task. You can readily find most of these materials in your household. These are some of the things that you will need:
- Bias tape
- Scraps of different materials (preferably fabric)
- Square quilt batting, around 64 square inches
- Selection

Initially, you need to choose the material scraps with the designs that you prefer to have on the outer part of the silicone pot holder trivet. Preferably, you should choose those with designs that can highly complement your current kitchen d�cor. For each pot holder that you plan to create, you will need two squares. This does not necessarily mean that you have to get two matching squares for each pot holder. You may simply use a square with a complementary shade for the back part of the pot holder.

Cutting

For every silicone pot holder trivet that you will create, you have to cut the quilter's batting in a square such that it will measure eight inches for each side of the material. In case you have a low pile variety of quilter's batting, you may have to use two or more of these. These will ensure that the finished products can provide you with adequate protection against the heat.

Laying

After choosing the batting, you may then sandwich this in between the two cloth squares that you chose for the silicone pot holder trivet. The cloth should have the right portion of the material facing out. On the other hand, the back part should be against the batting. After getting the correct alignment for these materials, you may then pin these layers into place. The quilter's pins can nicely do the job for you.

Drawing Guide Lines

You may proceed to draw a line along the imaginary diagonal part of the square. You have to do the same for the other part of the square fabric. After this, you may then mark the lines that are readily parallel to this using intervals of at least two inches. You have to do this until you get to the edge of the fabric.

Stitching

After drawing the guide lines, you need to stitch directly over these. If you do this correctly, you will notice that the stitches will create a quilting on the middle of the partially finished pot holder. This should be diamond shaped.

Finishing Touches

To finish off the entire project, you have to find the bias tape around the edge of the cloth and create a loop. You may then stitch along the surface of the bias tape using a sewing machine. The stitches should preferably be on the edges of the holder. The loop will eventually serve as the hanging part if you want to store the pot holder.

Keywords: Silicone Pot Holder Trivet, and Garlic Peeler

Learn more about SpinDistribute Article Distribution System. We also offer a Pro Article Writing Service to everyone who needs premium quality well-researched articles.

SpinDistribute.com Network

Each article you submit at SpinDistribute.com is sent through our innovative Article Distribution System to our network of more than 1840 publishers - about 55% of them are high-quality article directories, 30% of them are niche blogs and 15% of them are other content-rich websites.

To achieve the best possible success we only publish your article to most related websites. This means your article will show up on approximately 640 - 880 most related websites which will give you great SEO results.

We also offer a separate Professional Article Writing Service to everyone who's looking for high quality web content and well researched unique articles.