You can submit new articles, so we can make unique versions of them and distribute them for you.
If you want to simply publish the same article on 800 websites, you can tell us to do that.
You can see the archive and current status of all your article distributions.
You can order any number of high-quality articles - just let us know your keywords.
You can browse the archive of all the articles we have written for you.
You can order our Complete Service (10 high-quality articles plus 10 article distributions).
You can purchase more credits for our services and check your affiliate earnings.
Much more ...
The following article was published in our article directory on May 26, 2012.
Learn more about SpinDistribute Article Distribution System.
Article Category: Advice
Author Name: Steve James
Welcome to the gloopy.co.uk iPhone 3GS take-apart and iPhone repair guide. Here we show the internals of the new iPhone 3GS and how to safely reach them in 20 easy steps. Be sure to check our iPhone parts pages for replacement iPhone screens, batteries and more.
iPhone 3GS Prepare
Tools required:
Small Phillips Screw Driver
Small Flathead or exacto razor
Safe Open Tool
Repair Toolkit
Gather all neccesary tools and place your iPhone 3GS on a clean flat surface, use a soft cloth or towel to place under it.
iPhone 3GS
Enjoy
Take a look at the iPhone 3GS in all its shiny glory!
simcard and sim tray
Step 1
Begin by removing the sim tray, using the included sim card removal tool (or a paperclip if you've lost the tool.)
dock connector
Step 2
Holding your device on end you will notice two small screws on either side of the dock. These screws must be removed in order to open the case.
Step 3
Insert a small thin tool between the chrome ring and front panel glass directly above one of the screw holes. You will need to exert a small amount of pressure to seperate the display from the back panel.
inside 3GS iphone
Step 4
Lift the panel up from the dock end being careful not to tear or break any ribbons connected near the other end.
ribbon cable
Step 5
Unplug ribbons 1 and 2 by lifting them from the main board. Under ribbon 2 you will need to find and unclip ribbon 3, then carefully remove the display assembly.
3GS iphone mainboard screws
Step 6
Remove the seven screws circled in red. Note: One screw is located under the DO NOT REMOVE sticker :)
speaker and home switch assembly
Step 7
Unplug ribbon 4.
3GS iphone mainboard
Step 8
Llift the mother board out taking note of the camera which is still connected to the underside of the board. You will need to unplug the ribbon circled in red.
3GS iphone dissasmbled
Step 9
Place the mother board to the side.
3GS iphone battery
Step 10
Use the attached tab to pull up on the battery, there is a mild adhesive on the back side, so it will take a bit of force.
3GS iphone backpanel
Step 11
Remove the screw circled in red.
3GS iphone camera
Step 12
Carefully remove the camera.
3GS iphone headphone jack assembly screws
Step 13
Remove the nine screws circled in red.
3GS iphone headphone jack assembly
Step 14
Remove the headphone jack and attached flex cable.
3GS iphone speaker assembly
Step 15
Remove the speaker assembly which also contains the dock connector, antennae and home button as well.
3GS iphone vibrator assembly screws
Step 16
Remove the 2 screws circled in red.
3GS iphone vibrator assembly
Step 17
Place the vibrator assembly to the side.
3GS iphone lcd screws
Step 18 - Back to the Front Half
Remove the 2 screws circled in red. You will find 3 screws on the opposite side which must be removed as well.
3GS iphone lcd
Step 19
Lift the LCD free from the front panel glass.
3GS iphone completely disassembled
Step 20 - Finished
Pictured is every component inside the iPhone 3GS.
iPhone 3GS Chips Bottom Main Board
Under the Hood - Apple iPhone 3G exposed!
Top Main Board
Pictured is every component inside the iPhone 3GS labeled and noted precisely. Thanks to Semiconductor Insights
iPhone 3GS Chips Front Main Board
Bottom Main Board
Pictured are chips responsible for Bluetooth, and Flash memory on board.
Keywords:
Learn more about SpinDistribute Article Distribution System. We also offer one of the Best Article Writing Services out there - give us a try if you need great articles on various topics!
Each article you submit at SpinDistribute.com is sent through our innovative Article Distribution System to our network of more than 1840 publishers - about 55% of them are high-quality article directories, 30% of them are niche blogs and 15% of them are other content-rich websites.
To achieve the best possible success we only publish your article to most related websites. This means your article will show up on approximately 640 - 880 most related websites which will give you great SEO results.
We also offer a separate Professional Article Writing Service to everyone who's looking for high quality web content and well researched unique articles.